AH SYSTEM PAM-1840 DB
AMPLIFIERS
...
There are 107 elements for this category
...
Probe power for monitoring the RF power cables ...
TEM Cell to generate and measure the radiated emission from the EUT\DUT ...
Programmable current source for testing according to IEC / EN 61000-4-8 ...
Signal Generator 10 kHz - 1 GHz ...
Signal Generator 9 kHz to 1 GHz ...
Signal Generator 9 kHz - 3 GHz ...
Amplifier 10/15 Watt ...
RF conducted immunity system on power cables, signals and data ...
Receiver compliance with pre-built network LISN ...
EMI Receiver precompliance with built in LISN, antenna log periodic and bisonical, 5 meter coaxial cable, wooden tripode and carring bag ...
Fully Compliant Digital Receiver CISPR 16-1-1 ...
EMI receiver frequency range 10 Hz - 3 GHz (CISPR 16-1-1 Compliance from 9 kHz to 30 MHz) Digital ...
Receiver Fully CISPR 16-1-1 compliant Digital and Real Time FFT Analyzer, scanaione time in less than 25 seconds in Full CISPR compliance ...
Fully Digital Receiver Compliance ...
Fully Digital Receiver Compliance ...
Compliance Fully Digital Receiver from 6 to 18 GHz ...
RF conducted immunity system on power cables, signals and data in accordance to IEC / EN 61000-4-6 ...
Network impedance phase stabilized ...
Network impedance phase stabilized ...
Network LISN (Line Impedance Stabilization Network) to measure emissions on the supply lines in AC and DC ...
Network LISN (Line Impedance Stabilization Network) to measure emissions on the supply lines in AC and DC ...
Network LISN (Line Impedance Stabilization Network) to measure emissions on the supply lines in AC and DC ...
Network LISN (Line Impedance Stabilization Network) to measure emissions on the supply lines in AC and DC ...
Upgrade LISN to CISPR-16-1-2 ...
Pulse Limiter EMI receiver model 8010 ...
High Voltage Probe for EMI applications ...
Special network of negative polarity to discharge ESD generator model NSG-432 ...
Clamp for measuring radiated power ...
Filter option for CAN BUS for the GTEM Cell-500 ...
Amplifier applications EMI Frequency range 100 kHz - 1 GHz, Power 18/20 Watts ...
EMI applications Amplifier Range 10 MHz - 1 GHz, Power 70/100 Watts ...
EMI applications Amplifier Range 80 MHz - 1 GHz, Power 150/175 Watt ...
EMI applications Amplifier Range 80 MHz - 1 GHz, Power 250/350 Watt ...
Amplifier 150 kHz to 230 MHz Power 35 Watt ...
Amplifier 150 kHz to 230 MHz Power 80 Watt ...
EMI applications Amplifier Range 800 MHz - 3.1 GHz Power 25/30 Watts ...
EMI applications Amplifier Range 800 MHz - 3.1 GHz Power 50/55 Watts ...
EMI applications Amplifier Range 800 MHz - 3.1 GHz Power 100 Watt ...
EMI applications Amplifier Range 800 MHz - 3.1 GHz Power 180/220 Watt ...
EMI applications Amplifier Range 800 MHz - 3.1 GHz Power 300 Watt ...
Coupling-decoupling network for data lines to boost 1.2/50 ĩS ...
Coupling-decoupling network for data lines to boost 1.2/50 s; 10/700 ĩS ...
Clamp coupling disorder FT / Burst signal and data cables ...
Network coupling / decoupling test phase FT / Burst ...
Coupling-decoupling network for three-phase FT / Burst and Surge (combination wave, ring wave) ...
Coupling-decoupling network for three-phase FT / Burst and Surge (combination wave, ring wave) ...
Coupling-decoupling network manual, three-phase Surge (combination wave) ...
Capacitive coupling clamp pulse FT / burst according to ISO 7637-3 ...
Clamp coupling pulse FT / Burst to signal and data cables ...
Clamp coupling pulse FT / Burst to signal and data cables with Interlock circuit ...
Coupling decoupling network cables for unbalanced signals and non-shielded low-current ...
Coupling decoupling network for signal and data cables unshielded, unbalanced low-current lines ...
Coupling-decoupling network with manual selection of M-216 M-316 (2 or 3 wire) 16 Amps per phase ...
Coupling-decoupling network of 2-wire 16 Amps per phase ...
Coupling-decoupling network of 2-wire 16 Amps per phase ...
Coupling-decoupling network 3 wire 16 amps per phase ...
Coupling-decoupling network 3 wire 16 amps per phase ...
Coupling-decoupling network 5-wire with 16 amperes per phase shorting adapters included ...
Coupling-decoupling network 5-wire 25 amps per phase ...
Coupling decoupling network for signal and data cables 15-pin shielded ...
Coupling decoupling network for signal and data cables shielded ...
Coupling decoupling network for 1, 2, 4, pairs of unshielded cables for applications 1000BaseT & PoE ...
Calibration according to ISO 17025 in accordance with IEC / EN 61000-4-6 for CDN M, A, S or T00X ...
Probe injection RF Conducted Immunity Test ...
EMI DATA SURGE FOR MAINFRAME MODEL NSG-3040 ...
Filter Option DC 2 X 10 Amp 4 mm banana jack in addition to the standard filters GTEM Cell-500 ...
Cell for emission and immunity testing from DC to 20 GHz ...
Cell for emission and immunity testing from DC to 18 GHz Power Max 100 W ...
Cell for emission and immunity testing from DC to 20 GHz Complete with box filters, single phase 16 A 2 X, 3X N-type connector panel and guided through optical fibers ...
Calibration Kit Adapter for mod.MD-103 ...
Matched sets IEC (surge) ...
Synchronization unit for Surge Model NSG-3040 and Modula ...
Drainage system to ISO 10605 (2008) ...
Adapter pattern generator NSG-5500 ...
SHV PLUG Burst generator ...
Suitable for measuring FT / Burst by connecting the output of the CDN ...
Test Adapter for pulsed magnetic field ...
Integrated system with a signal generator from 80 MHz to 6 GHz ...
Clamp injection test according to IEC / EN 61000-4-6 Complete Shorting adapter ...
Target for measuring pulse ESD Standard ANSI, ISO and IEC 61000-4-2 Ed 2.0 (2008-12) ...
Probe active / passive test for immunity and emission at RF Test Ideal for IEC / EN 61000-4-6, ISO 11452-4, Part RTCA/DO-160 20, MIL-STD-461 standards and other automotive ...
Calibration of Probe ISO17025 active / passive test for immunity and emission at RF ...
Module for the generation of pulses 1, 2a, 6 of the ISO / SAE ...
Sensors to measure electric and magnetic Delcampe near boards and electronic devices (Near Field Probes) ...
Builder FT / Burst up to 8 KV ...
Builder FT / Burst up to 8 KV ...
Modular Mainframe for the generation of pulses for the conduct impulses Surge immunity, Ring Wave, Burst, PQT, damped wave ...
Builder FT / Burst with built-phase CDN ...
EMI EXPANDABLE MODULAR GENERATOR MAINFRAME ONLY FOR TEST OF IMMUNITY 'WITH BUILT-PHASE CDN ...
EMI EXPANDABLE MODULAR GENERATOR FOR TEST OF IMMUNITY ' ...
EMI EXPANDABLE MODULAR GENERATOR FOR TEST OF IMMUNITY 'pipe up to 6.6 kV full modules: CWM-3650-1 pulse, 2 / 50 - 8 / 20 ĩS-RWM-3652-kHz Ring Wave 0.5 μs/100 FTM-3425 FT / Burst 5 / 50 ns-PQM-3403 Variation, Dips and Drops-3061-CDN-...
Compact system for measuring RF conducted immunity and radiated immunity consists of RF generator, Amplifier and Power Meter ...
ESD Gun ...
ESD Gun ...
ESD Gun ...
Electrostatic generator ...
Main Frame tabbed interface IEEE 488, RS 232 full form FT 5530 Model simulation EFT / Burst to pulse 3a/3b ...
Main Frame with Egenera controller arbitrary function Mod 5620 ...
Option waveguide fiber step for GTEM Cell-250 ...
Form amplifier / battery simulator for Automotive ...
Form amplifier / battery simulator for Automotive ...
Jig calibration model for the probe current CIP-9136-A ...
Extension 400 watts per cell GTEM-500 ...
Extension 100 watts per cell GTEM-250 ...
Option window screen to inspect the GTEM cell-250 ...
Filter option 10X15 Amp attack banana, 4X5 Amp Sub-D 9 PIN-250 GTEM cell ...